Bosch AUTODOME IP 4000i NDP-4502-Z12, User Manual

Page: 24 / 78

24 en | Camera AUTODOME IP 4000i
2020-06 | 2.0 | User Manual Bosch Security Systems
6 Camera
6.1 Installer Menu
Base frame rate
Select the base frame rate for the camera.
Note: Shutter times, frame rates, and the analog output (if present) are affected by this value.
Notice!
Changing the field Sensor mode
A change to the parameter in the field Sensor mode requires approximately 10-20 seconds to
complete. During this time, no changes can be made. The cameo image freezes.
Image rotation
To invert the live video image (because the camera is mounted in inverted orientation), select
180°.
If the camera is mounted upright, select 0°.
Mirror image
Select On to output a mirror image of the camera picture.
Note : Privacy masks are not supported in mirror image mode.
Coding standard
Select the encoding mode, H.264 or H.265 .
Reboot device
Click Reboot to restart the camera.
Factory defaults
Click Defaults to restore the factory defaults for the camera. A confirmation screen appears.
Allow several seconds for the camera to optimize the picture after a reset.
Note : Clicking this button also clears the service-level password. Operators must reset the
password before doing anything else.
6.2 Scene Mode
A scene mode is a collection of image parameters that are set in the camera when that
particular mode is selected (installer menu settings are excluded). Several pre-defined modes
are available for typical scenarios. After a mode has been selected, additional changes can be
made through the user interface.
Customize the mode, if necessary, for the specific requirements of the site by selecting
different values for the fields below.
Current mode
Select the mode you wish to use from the drop-down menu.
–
Standard
This mode is optimized for most standard scenes both indoor and outdoor.
–
Sensitivity boost
This mode provides maximum sensitivity in low light scenes by using longer exposure times,
resulting in bright images even in extreme low light.
–
Fast movement
This mode is used for monitoring fast moving objects like cars in traffic scenes. Motion
artifacts are minimized and the image is optimized for a sharp and detailed picture in color
and monochrome.
–
Vibrant
This mode provides a more vivid image with increased contrast, sharpness, and saturation.