18
en | General
AUTODOME IP 4000i
2020-06 | 2.0 |
User Manual
Bosch Security Systems
Logo position
Select the position for the logo on the OSD:
To the left of the name
,
To the right of the
name
, or
Logo only
.
Select
Off
(the default value) to disable logo positioning.
Time stamping
This field sets the position of the time overlay. It can be displayed at the
Top
, at the
Bottom
or
at a position of your choice that you can then specify using the
Custom
option. Or it can be
set to
Off
for no overlay information.
1.
Select the desired option from the list.
2.
If you select the
Custom
option, additional fields are displayed where you can specify the
exact position (
Position (XY)
).
3.
In the
Position (XY)
fields, enter the values for the desired position.
Display milliseconds
If necessary, you can also display milliseconds. This information can be useful for recorded
video images; however, it does increase the processor's computing time. Select
Off
if you do
not need to display milliseconds.
Live video indicator
Select
On
to display the
Live video indicator
, an icon that pulses on the OSD to show that the
video stream is live.
Select
Off
to hide the
Live video indicator
.
Alarm mode stamping
Select
On
to display a text message overlay in the image in the event of an alarm. It can be
displayed at a position of your choice that you can then specify using the
Custom
option. Or it
can be set to
Off
for no overlay information.
1.
Select the desired option from the list.
2.
If you select the
Custom
option, additional fields are displayed where you can specify the
exact position (
Position (XY)
).
3.
In the
Position (XY)
fields, enter the values for the desired position.
Alarm message
Enter the message to be displayed in the image in the event of an alarm. The maximum text
length is 31 characters.
Title OSD
OSD titles can be displayed at a position of your choice.
Select
On
to display sector or pre-position title overlays continuously in the image.
Select
Momentary
to display sector or pre-position title overlays for a few seconds.
1.
Select the desired option from the list.
2.
Specify the exact position (
Position (XY)
).
3.
In the
Position (XY)
fields, enter the values for the desired position.
Select
Off
to deactivate the display of overlay information.
Camera OSD
Select
On
to momentarily display camera response information, such as Digital Zoom, Iris
open/close, and Focus near/far overlays in the image. Select
Off
to display no information.
1.
Select the desired option from the list.
2.
Specify the exact position (
Position (XY)
).
3.
In the
Position (XY)
fields, enter the values for the desired position.
Title region
Select
On
to set or to edit the position of the title region on the OSD.
Summary of Contents for AUTODOME IP 4000i NDP-4502-Z12
