Bosch AUTODOME IP 4000i NDP-4502-Z12, User Manual

Page: 41 / 78

AUTODOME IP 4000i Camera | en 41
Bosch Security Systems User Manual 2020-06 | 2.0 |
1. Determine the North compass heading, then move the camera to that position.
2. Select the radio button On for the parameter Compass .
3. Click the button next to North point to set the calibration point.
North point
– Click the Set button to overwrite the existing North point . A dialog box appears with the
message, “Overwrite North point ?” To confirm, click OK . To cancel, click Cancel .
– Click the Clear button to reset the North point to factory defaults. A dialog box appears
with the message, “Reset North point to factory defaults?” To confirm, click OK . To
cancel, click Cancel .
Alternative home position
Click Set to set the alternative home position for the camera.
Click Clear to clear the alternative home position.
6.14 Pre-positions and Tours
The camera can store up to 256 preset scenes. You can define the individual scenes that
comprise a
Pre-position Tour .
You define individual pre-position scenes, then use these scenes to define the Pre-position
Tour . The tour starts from the lowest scene number in the tour and progresses sequentially to
the highest scene number in the tour. The tour displays each scene for a specified dwell time
before advancing to the next scene.
By default, all scenes are part of the
Pre-position Tour unless removed.
To define and edit an individual pre-position:
1. Set the pre-position in the video image.
–
Use the PTZ controls to move the camera into position.
– Using the Live preview window as reference, navigate to the scene that you want to
define as a pre-position.
2. Click the button Add pre-position (“+”) to define the pre-position.
3. Select a number for the pre-position, from 1 to 256.
4. Type an optional name for the pre-position, up to 20 characters long.
5. Click OK to save the pre-position to the list Pre-positions .
6. To include the pre-position in a standard tour, select the check box to the left of the field
“
Include in standard tour (marked with *) .” An asterisk (*) appears to the left of the
name in the list Pre-positions .
7. For IR cameras only: To add IR light to the pre-position, select the check box to the left of
the field “
IR light (marked with #)”.
8. To delete a pre-position from the list, select the pre-position and click the button Delete
pre-position ( ).
9. To overwrite an existing pre-position:
–
Use the PTZ controls to navigate to the new pre-position.
– In the list Pre-positions , select the pre-position that you want to overwrite.
– Click the button Overwrite pre-position (disk icon) to apply the new pre-position to
the existing pre-position.
– To change the name of the pre-position, double-click the pre-position in the list.
Then, change the name in the dialog box
Edit Pre-position and click OK.
10. To view a pre-position in the preview window, select the pre-position in the list and click
the button Show pre-position (eye icon).
11. To view a pre-position from the Live page: