Bosch AUTODOME IP 4000i NDP-4502-Z12, User Manual

Page: 28 / 78

28 en | Camera AUTODOME IP 4000i
2020-06 | 2.0 | User Manual Bosch Security Systems
This field operates in conjunction with the field Noise reduction to reduce the noise
introduced by movements in the scene. When Noise reduction is set to “On,” then the 3D
noise reduction level field is active.
Select the appropriate level of noise reduction, from 1 to 5 (2 is the default).
Intelligent Dynamic Noise Reduction
Select On to activate intelligent Dynamic Noise Reduction (DNR) which reduces noise based
on motion and light levels.
6.2.3 Scene Mode Scheduler
The scene mode scheduler is used to determine which scene mode should be used during the
day and which scene mode should be used during the night.
1.
Select the mode you wish to use during the day from Marked range drop-down box.
2. Select the mode you wish to use during the night from Unmarked range drop-down box.
3. Use the two slider buttons to set the Time ranges .
6.3 Color
Brightness (0...255)
Adjust the brightness with the slider from 0 to 255.
Contrast (0...255)
Adjust the contrast with the slider from 0 to 255.
Saturation (0...255)
Adjust the color saturation with the slider from 0 to 255.
White balance
Select the appropriate white balance mode from the drop-down list.
–
Basic auto mode allows the camera to continually adjust for optimal color reproduction
using an average reflectance method. This is useful for indoor light sources and for
colored LED light illumination.
– Standard auto mode allows the camera to continually adjust for optimal color
reproduction in an environment with natural light sources.
– Sodium lamp auto mode allows the camera to continually adjust for optimal color
reproduction in an environment with sodium vapor light sources (street lighting).
– Dominant color auto mode takes into account any dominant color in the image (for
example, the green of a football pitch or of a gaming table) and uses this information to
obtain a well balanced color reproduction.
– In Manual mode the Red, Green, and Blue gain can be manually set to a desired position.
Apply white balance
Click Hold to put ATW on hold and save the current color settings. The mode changes to
manual.
The table below identifies the options available in the field
White balance and the additional
fields that appear depending on the options selected.
Option in field “White
balance”
Additional
Input field Additional fields for
configuration
NOTES
Basic auto RGB-
weighted
white
balance R-weight
G-weight
B-weight The 3 “-weight” fields appear
only when the option in the field
“
RGB-weighted white balance ”
is On .