Bosch AUTODOME IP 4000i NDP-4502-Z12, User Manual

Page: 25 / 78

AUTODOME IP 4000i Camera | en 25
Bosch Security Systems User Manual 2020-06 | 2.0 |
– Color Only (Traffic)
In this mode, the camera does not switch to monochrome mode at low light levels. The mode
is optimized to minimize motion artifacts and to capture the color of vehicles/pedestrians and
traffic lights, even at night, for scenarios such as city surveillance and traffic monitoring.
–
Custom mode #1
If necessary, select a custom mode.
–
Custom mode #2
If necessary, select a second custom mode.
Mode ID
The name of the selected mode is displayed.
Copy mode to
Select the mode from the drop-down menu to which you wish to copy the active mode.
Note : To restore the default setting of all scene modes, you must click the SC setting.
Restore mode defaults
Click Restore Mode Defaults to restore the factory default modes. Confirm you decision.
6.2.1 Picture Settings
Color
White Balance
Adjusts the color settings to maintain the quality of the white areas of the image.
Red Gain
The red gain adjustment offsets the factory white point alignment (reducing red introduces
more cyan).
Blue Gain
The blue gain adjustment offsets the factory white point alignment (reducing blue introduces
more yellow). It is only necessary to change the white point offset for special scene
conditions.
Note: The fields
Sodium red level and Sodium blue level appear only when the value in the
field White balance is “Sodium lamp auto” or “Sodium lamp.”
Saturation
Select the percentage of light or color in the video image. The range of options is from 60% to
200%; the default is 100%.
Color hue
Select the degree of color in the video image. The range of options is from -14° to 14°; the
default is 0°.
Exposure and gain control
Gain control
Adjusts the automatic gain control (AGC).
–
AGC (default): Automatically adjusts the gain to the lowest possible value needed to
maintain a good picture.
– Fixed : no enhancement. This setting disables the Max. Gain Level option.
Fixed Gain
Use the slide to select the desired number for fixed gain. The default is 2.
Maximum gain level
To set the Maximum gain level , select Low , Medium or High from the drop-down box.