Bosch AUTODOME 5000, Operation Manual

Page: 54 / 74

Figure 6.1: Alarm Type
1 Normally Open
2 Normally Closed
3 Alarm
Alarm Action
The alarm actions include PRESET, PRESET TOUR, AUTOPAN and TOUR functions. Select one
of these modes so that the action will be executed when the selected alarm pin is triggered.
The items listed below will change in accordance with the selected alarm action. Additionally,
when an alarm is triggered, there will be a flash warning notice “ALARM” displayed at the
upper right corner of the screen.
Notice!
When the alarm condition (dwell time setting: 1 to 127 seconds / ALWAYS) is released, the
camera will go back to the previous status before alarm was triggered.
Preset Point
Select a preset point where the camera should go when the alarm pin is triggered. The preset
point(s) should be set prior either in the PRESET setup menu or through the keyboard.
Preset Tour
Select a preset tour line that the camera should execute when the alarm pin is triggered. The
preset tour line(s) should be defined prior either in the PRESET TOUR setup menu or through
the keyboard.
54 en | On-Screen Display (OSD) Menu AUTODOME 5000 Analog PTZ Camera
2013.07 | 1.3 | Operations Manual Bosch Security Systems, Inc.