Bosch AUTODOME 5000, Operation Manual

Page: 58 / 74

– System Reset
Select this function for system reboot. Press <CAMERA MENU> and system reboot will
be initiated.
– Initialize Camera
This function allows users to restore the camera to its factory default state. Press
<CAMERA MENU> and the camera will start to retrieve the factory default setting.
Password
In this menu, you can set the password for OSD control. Once the function is activated, you
must enter the password every time that you access the OSD menu. The Password setting
menu is shown as below.
The password setting procedure is as the following.
1.
Choose a number with direction keys and then press the <CAMERA MENU> key to input
the number. For example: <0> <CAMERA MENU>, <1> <CAMERA MENU>, <2> <CAMERA
MENU>, <3> <CAMERA MENU>. The password will be 0123.
2. In the second line, enter the same password again to confirm the setting.
3. Move the cursor to <SAVE> and press <CAMERA MENU> to save the setting.
4. Move the cursor to <EXIT> and press <CAMERA MENU> to exit the password setting
page.
If OSD Password function is already enabled, the password request message will be displayed
when you press the <CAMERA MENU> key to enter the OSD menu. Please enter the password
to access the OSD main menu.
Notice!
If it is the first time activating the Password Function, please enter the Master Password
(9527) to setup a new password.
Image Inverse
Activates the image inverse function.
You can select <ON> to make the displayed image inversed vertically and horizontally (see the
figures shown below). Occasions to employ the function include conferences, demonstration,
testing, etc. The default setting is <OFF>.
58 en | On-Screen Display (OSD) Menu AUTODOME 5000 Analog PTZ Camera
2013.07 | 1.3 | Operations Manual Bosch Security Systems, Inc.