Page 26
3BE390954NU – 07/15
BONNET GRANDE CUISINE
Registered office:
Rue des Frères Lumière - Z.I Mitry Compans
F-77292 MITRY MORY Cedex
"Start" a cleaning cycle.
- It is still possible to change the intensity of the cleaning cycle whilst the zone is flashing (phase before
detergent is injected). Whilst the timer is still displayed:
Time remaining before the end of the cycle.
- At the end of the cycle the display indicates "00 00".
9.4.2 STOPPING THE CLEANING CYCLE
To stop a cleaning cycle that is running:
- Press the stop button:
"STOP" stops the cycle
.
If this action is not validated the cycle is paused but not stopped (It will restart after a few seconds if no further
action is taken).
Pressing the button for a second time will restart the cleaning cycle
- Confirm by validating using the “End?”.
"End?" Stops the cleaning cycle.
Depending on the progress of the cleaning cycle, it will be immediately stopped or will go directly to rinsing before
stopping.
Cycle in progress
Action in the event the cycle is stopped
Stops immediately
Automatically switches to rinse mode then stops
Finishes rinsing then stop
Warning: If the message « i81 » appears during a washing cycle, check the water
valve and pressure. It is imperative to rinse profusely the cavity before
cooking.
Prewash
Preheating
Wash
Rinse
