Page 12
3BE390954NU – 07/15
BONNET GRANDE CUISINE
Registered office:
Rue des Frères Lumière - Z.I Mitry Compans
F-77292 MITRY MORY Cedex
Pressing the “Ed it” zone accesses the parameters that
allow changes to be made to recipes (as would pressing the
“PROG/VALID” button or the coder)
When consulting the recipes access to the Adjust zone is
blocked by this parameter
The current value is displayed in the temperature zone
Change the value with the coder or the
/
buttons.
Settings:
- “yes”: settings can be modified whilst consulting the
details of the programmes
- “no”: modification is not possible
The default setting is “yes”
Pressing Cleaning/Tools or any inactive zone exits the
menu and returns to the previous menu screen.
2.5.5 « CHEF » MENU: CLIENT PARAMETERS
Pressing on the CHEF zone gives access (as would
pressing the “PROG/VALID” button or the coder)
Access to this menu is by PIN code (restricted access)
Pressing the Parameter allows its value to be adjusted (as
would pressing the “PROG/VALID” button or the coder)
The value is displayed in the temperature zone
Moving from one Parameter or from one value to another
can be done using the coder or with the
/
buttons.
Adjustable parameters:
- Choice of language
- Adjust backlighting level
- Buttons Bip
- Buzzer intensity
- Number of times the buzzer sounds at the end of a
cooking cycle
- Adjust Date: Year / Month / Day / Hour / Minutes
- Unit of temperature
- Preheating: Preheat temperature
- Default core temperature
- Holding mode: Temperature / Time
- Screen on standby: Time before switching to standby
- Cooling: With or without water
- Choice of language
Parameters / values
Language: « LanG »
« Fr »: French
« En »: English
Default setting is « Fr »
Backlighting: « LuMi »
Adjustable from 1(minimum still
visible) to 10
Default setting is « 10 »
Buttons : « biP »
« YES »: Bip
« no »: No bip
Default setting is « YES »
Buzzer intensity: « BuZZ »
Adjustable from 1 (low) to 10 (loud)
Default setting is « 3 »
