Page 11
3BE390954NU – 07/15
BONNET GRANDE CUISINE
Registered office:
Rue des Frères Lumière - Z.I Mitry Compans
F-77292 MITRY MORY Cedex
2.5.3 « CLEA » MENU: CLEANING
See paragraph “CLEANING MENU”
2.5.4 « PROG » MENU: MODIFICATION OF RECIPE PROGRAMMES
The “ProG” menu gives access to programming of recipes and to authorisation levels
- Creation of recipe programmes: “Pr01” to “Pr18”
- Authorisation to modify programmes: “Ed it”
Pressing the “ProG” zone gives access (as would pressing
the “PROG/VALID” button or the coder)
Access to this menu is by PIN code (restricted access)
“Pr01” is displayed at first. Moving the coder or the
/
buttons scrolls through the other programmes up to Pr18
then “Ed it” for other authorisations
Pressing the “Prxx” zone gives access into the programme
(as would pressing the “PROG/VALID” button or the coder)
The following screen allows each phase to be programmed:
Choice of mode, time settings, temperature and functions …
The number of phases in the programme is indicated by the
white dots.
Pressing Cleaning/Tools or any inactive zone exits the
menu and returns to the previous menu screen
The dots at the side of the “PROG/VALID” button indicates
the number of the cooking phase.
1 point = 1st phase ; 2 points = 2nd phase…
Cycle in question = cyan; others = white
Pressing the “PROG/VALID” button moves on to the next
phase. If one or more parameters are missing, a “Bip” will
sound and the screen will remain in the not validated phase
If no time is set before the end of the recipe (the last cycle
not programme dis not taken into account), the screen will
return to the “Prxx” display.
The last phase (No 6) corresponds to the preheat before
cooking starts. By default the setting is “---“ (no preheating).
The recipe is saved instantly. A successive display of the
phases starts …
Removing/Deleting of phases and programmes:
If the set temperature of a cycle is changed to “---“, the
effect after pressing the “PROG/VALID” button is to erase
all the cycles that follow or the entire recipe if this is done
for cycle 1
Empty programmes are not displayed when consulting the
programme list
