65
1. Slide cover tabs each side of fuse then pull
fuse out
TYPICAL — TOP FUSE BLOCK
1. MPEM supply
2. Gauges supply
3. Bilge pump
TYPICAL — BOTTOM FUSE BLOCK
1. Bilge air blower
2. Additional accessories
3. Navigation lights
When finished, ensure to properly place
seal in cover.
1. Properly place seal in cover
Carefully position cover on fuse block
then firmly push until you hear a snap-
ping sound for each locking tab.
Charging System
If the battery is regularly discharged,
check this fuse condition.
Fuses for the charging systems are lo-
cated in the small electrical box(es) in
the engine compartment. On Sportster LT
model, the port side box is for the port
engine and the starboard side box is for
the starboard engine.
Pull tabs outside one at a time while
pulling out cover.
F04H63Y
1
F04H64Y
1
2
3
F04H66Y
1
2 3
WARNING
If any water is found in the electri-
cal box, immediately refer to an
authorized dealer before operating
the boat.
F04H62Z
1
lmo2002_003a.book Page 65 Wednesday, November 14, 2001 2:39 PM
