55
4. Run the engine about 3 minutes at
a fast idle around 3500 RPM.
CAUTION:
Never run engine longer
than 5 minutes. Drive line seal has
no cooling when sport boat is out of
water.
5. Remove plug from air intake silenc-
er cover.
TYPICAL — SPORTSTER LT SHOWN
1. Air intake silencer cover
2. Pull plug
TYPICAL — SPORTSTER LT SHOWN
1. Spray BOMBARDIER LUBE here
947 ENGINE
1. Air intake silencer
2. Spray BOMBARDIER LUBE here
6. Spray BOMBARDIER LUBE lubri-
cant keeping engine at fast idle
during one minute.
7. Close the water tap then stop the
engine.
8. Remove hose pincher.
CAUTION:
Always close the water
tap before stopping the engine.
NOTE:
For storage, engine should be
run out of fuel while lubricating by turn-
ing the fuel valve to OFF position.
CAUTION:
When engine begins to
run irregularly because of fuel star-
vation, immediately stop water flow
before engines dies.
9. Disconnect the garden hose. En-
sure the rubber washer remains in
boat’s connector (upper connec-
tors).
10. Remove spark plug cables and de-
tach holding bracket from cooling
hose.
F01F25Z
2
1
F00M01Y
1
F02H0ZY
1
2
lmo2002_003a.book Page 55 Wednesday, November 14, 2001 2:39 PM