43
PRE-OPERATION CHECKS
Some of the following items may not
have been previously covered in this
guide, however they will be described
in the MAINTENANCE or SPECIAL
PROCEDURES section. Please refer
to these portions to have more de-
tailed information.
SUMMARY
WARNING
The pre-operation check is very
important prior to operating the
vehicle. Always check the proper
operation of critical controls, safe-
ty features and mechanical com-
ponents before starting. If not
done as specified here, severe in-
jury or death might occur. Bring all
safety equipment required by lo-
cal laws.
WARNING
Engine should be off and the safety lanyard must always be removed from
its switch prior to verifying any of the following. Only start craft once all
items have been checked and operate properly.
ITEM
OPERATION
✓
Hull
Inspect.
Jet pump water intakes
Inspect/clean.
Bilge
Drain. Ensure plug is secured.
Battery
Inspect tightness of cables and retaining straps.
Main battery cut-off switch
Ensure it is in the ON position.
Navigation lights
Check operation.
Fuel/oil reservoirs
Refill.
Engine compartment
Verify fuel/oil system components.
Fire extinguisher
Inspect condition/mounting.
Steering
Check operation.
Throttle/shifter system
Check operation.
Weedless system
Ensure it is not activated.
Bilge blower and bilge pump
Check operation.
Safety lanyard/engine start/stop
buttons
Check operation.
Mandatory safety boating
equipment
Check operation.
Storage compartment covers
Ensure they are closed and latched.
lmo2002_003a.book Page 43 Wednesday, November 14, 2001 2:39 PM
