46
OPERATING INSTRUCTIONS
Launching/Loading
CAUTION:
Before launching the
craft, ensure the main battery cut-off
switch is turned ON and the bilge
plugs are fully screwed.
Ensure the bilge plug is fully screwed
and the main battery cut-off switch is
turned ON.
Before loading or launching the boat
on/from the trailer, ensure that the
weedless system lever, is completely
pushed in.
This will allow the water intake grates
to be in upper position, eliminating the
possibility to come in contact with the
trailer.
CAUTION:
Loading/launching the
boat on/ from the trailer with the wa-
ter intake grate in lower position will
cause damage to the weedless sys-
tem and possibly to the fiberglass
hull.
TYPICAL — WRONG POSITION
1. Trailer frame
2. Grate in fully open position
TYPICAL — CORRECT POSITION
1. Trailer frame
2. Grate in fully close position
WARNING
Always perform PRE-OPERATION
CHECKS before operating the craft.
Become thoroughly familiar with
all controls and the function of
each. Should any control or instruc-
tion be not fully understood, refer
to an authorized Sea-Doo dealer.
F04J2WY
2
1
F04J2ZY
2
1
lmo2002_003a.book Page 46 Wednesday, November 14, 2001 2:39 PM
