61
Weedless System Mechanisms
Use SEA-DOO synthetic grease and
lubricate as follows:
Open RH storage compartment cover
and remove basket.
Grease sliding parts as shown.
1. Grease sliding parts and surfaces
Reinstall basket and close cover.
From underneath of hull, lubricate wa-
ter intake grate(s) at pivoting points
and cable rod(s) using BOMBARDIER
LUBE lubricant.
TYPICAL
1. Lubricate cable rod
2. Lubricate pivoting points
Anticorrosion Protection
Throttle/Choke Cable(s)
Lubricate the throttle and choke ca-
ble(s) with BOMBARDIER LUBE lubri-
cant every 25 hours of use (every 10
hours in salt water use).
Electrical Connections
As necessary, apply dielectric grease
on battery posts and all exposed cable
connectors including stern light con-
nectors on mat and boat.
Additional Lubrication
BOMBARDIER LUBE lubricant will help
to prevent corrosion and keep proper
operation of moving mechanisms.
Lubrication of the following items
should be performed every 50 hours in
fresh water use but every 10 hours in
salt water use.
Choke Lever(s)
Fully pull choke lever(s) and lubricate
the metallic portion.
F04J45Y
1
1
F09J03Y
1
2
F04L0CY
lmo2002_003a.book Page 61 Wednesday, November 14, 2001 2:39 PM
