42
NOTE:
Inspection applies for both engine systems where applicable.
We recommend that this inspection chart be signed by an authorized dealer.
10-HOUR INSPECTION CHECK LIST
✓
Engine ignition timing if required
Spark plug inspection, cleaning and adjustment
Fuel system lines and fasteners/pressurization test
Carburetor adjustment including throttle/choke cables if required
Oil lines and filter
Oil injection pump adjustment if required
Engine support and engine rubber mounts
Muffler, battery and reservoir fastening devices
Exhaust system hose clamps torque
Carburetor flange screws and flame arrester support
Steering system and low-speed steering control system
Steering cable adjustment if required
Shifter cable adjustment if required
Ensure that throttle lever
s
keep the selected position. Adjust lever tension as
necessary
Hose condition and fasteners
Bilge pump and bilge blower
DESS system and start/stop buttons operation
Monitoring beeper
Electrical connections (starter, battery, etc.)
Lighting system inspection
Impeller shaft reservoir oil replacement
Torque jet pump retaining nuts
Impeller condition, impeller/wear ring clearance
PTO flywheel lubrication
Water intake grates/weedless system/hull condition
Inspection of fasteners for tightness
Inspect/clean engine drain tube
Date of 10-hour inspection
Authorized dealer signature
Dealer code
lmo2002_003a.book Page 42 Wednesday, November 14, 2001 2:39 PM
