Bomag BW 213 D-4, Operating Instructions, Maintenance Instructions

Page: 79 / 102

Every 1000 operating hours
BOMAG
79
BW 213 D-4
Fig. 118
l
Unscrew oil level inspection plug 1 (Fig. 118)
on the drum and fill in oil through the filler
opening (2), until it starts to drip out from the
level inspection bore.
For quality and quantity of oil refer to the table
of fuels and lubricants.
l
Screw oil filler (2) and level inspection plug (1)
back in tightly.
l
Repeat the oil change on the opposite side.
l
Check the oil level once again at operating
temperature (after running the machine for
about half an hour with vibration).
! Caution
Overfilling causes overheating and destruc-
tion of the vibration bearings!
5.30 Retighten the fastening of
the axle on the frame
Fig. 119
l
Check all fastening nuts on axle mounting
bolts (Fig. 119) for tight fit.