Bomag BW 213 D-4, Operating Instructions, Maintenance Instructions

Page: 76 / 102

Every 1000 operating hours
BOMAG
76
BW 213 D-4
5.26 Check the engine mounts
Fig. 112
l
Tighten fastenings of intake and exhaust man-
ifolds (Fig. 112) on the cylinder heads.
l
Check sockets and clamps between air filter,
exhaust turbocharger and charge air line as
well as the lubrication air line for tight fit and
leaks.
l
Retighten the fastening screws for oil sump
and engine mounts.
5.27 Change the oil in the drive
axle
i Note
On other axle versions drain and filler plugs are of
slightly different design. Perform the oil change ac-
cordingly.
!
Caution
Drain oil only at operating temperature.
Environment
Catch old oil and dispose of environmentally.
l
Park the machine on level ground.
Fig. 113
l
Clean and unscrew all level inspection and
drain plugs (Fig. 113).
l
Drain and catch all oil.
l
Clean the drain plug and turn it back in with a
new seal ring.