Bomag BW 213 D-4, Operating Instructions, Maintenance Instructions

Page: 45 / 102

Operation
BOMAG
45
BW 213 D-4
4.14 Transport
!
Danger
Danger of accident!
Use only stable loading ramps of sufficient
load bearing capacity. Make sure that persons
are not endangered by the machine tipping or
sliding off.
Lash the machine down, so that it is secured
against rolling, sliding and turning over.
Do not stand or step under loads being lifted.
Always use shackles on the lifting points for
loading, tying or lifting the machine.
Fig. 64
l
Pull the spring pin (Fig. 64) out.
l
Engage the articulation lock and secure it with
the spring pin.
Fig. 65
l
Engage the articulation lock and secure it with
the spring pin (Fig. 65).
Fig. 66
l
Lash the machine on the transport vehicle
(Fig. 66), use the four lashing eyes on front
and rear frame for this purpose.
l
Support the front frame to avoid overstressing
of the rubber buffers.
Fig. 67
l
For lifting use also the four lifting eyes (Fig. 67)
and appropriate lifting gear.
Weights: See technical data
l
After transport release the articulation lock
again and store it in the receptacle.