Bomag BW 213 D-4, Operating Instructions, Maintenance Instructions

Page: 37 / 102

Operation
BOMAG
37
BW 213 D-4
i Note
Shift the travel lever out of "0"-position slowly to
forward or reverse, the machine will drive forward
or reverse at a speed which corresponds with the
displacement of the travel lever.
Returning the travel lever towards neutral will
brake the machine and in "0"-position of the travel
lever the machine will stop.
! Danger
Danger of accident!
When stopping on inclinations and slopes pull
the travel lever to the right and lock it in brak-
ing position.
Important notes on travel operation
!
Caution
When changing the travel direction hold the
travel lever for a moment in "0"-position, until
the machine has stopped, before actuating to
the new travel direction.
Do not operate jerkily!
When driving up and down inclinations move
the travel lever slowly back towards neutral to
brake the machine.
If the engine speed drops when driving up ex-
treme inclinations move the ravel lever slightly
back, if necessary change to the lower speed
range.
4.6 Switching the vibration on
and off
! Danger
Risk of damage!
When compacting with vibration you must
check the effect of nearby buildings and un-
derground supply lines (gas, water, sewage,
electric power), if necessary stop compaction
with vibration.
Do not activate the vibration on hard (frozen,
concrete) ground. Danger of bearing damage!
Fig. 43
l
Switch to working speed (Fig. 43) (turtle).
Pre-selecting the vibration
Fig. 44
l
Pre-select amplitude/frequency with the rotary
switch (Fig. 44).