Bomag BW 213 D-4, Operating Instructions, Maintenance Instructions

Page: 32 / 102

Operation
BOMAG
32
BW 213 D-4
4.1 General notes
Please read section 3 Indicators and Control Ele-
ments thoroughly before operating the machine if
you are not yet fully familiar with the indicators and
control elements of the machine.
All indicators and control elements are described
in detail in this chapter.
4.2 Tests before starting to op-
erate
The following tests must be performed before
each work day or before a longer work period.
! Danger
Danger of accident!
Please observe strictly the safety regulations
in chapter 2 of these operating and mainte-
nance instructions!
l
Park the machine on level ground.
Check:
l
Fuel tank and fuel lines for leaks
l
Bolted connections for tight fit
l
Function of the steering
l
Check the machine for cleanliness and dam-
age
l
availability of the appropriate operating and
maintenance instructions,
l
check if the machine has been properly serv-
iced.
i
Note
For a description of the following work refer to the
section "maintenance every 10 operating hours"
l
engine oil level
i
Note
Hydraulic systems, which are filled with Panolin
HLP Synth. 46, the same oil must be used for fill-
ing up. In case of any other ester based oil consult
the lubrication service department of the respec-
tive oil manufacturer.
l
Check the hydraulic oil level, top up if neces-
sary.
l
Check the coolant level, top up if necessary.
!
Danger
Fire hazard!
Do not refuel in closed rooms
l
Check the fuel level, top up if necessary.