Body Masters AG 1000 Instruction Manual Download Page 71

Page: 71 / 97

XB 965

PEC DECK

MUSCLES TRAINED

GENERAL INSTRUCTIONS

WARNING

PRIOR TO USING THIS MACHINE

CONSULT YOUR PHYSICIAN TO INSURE PHYSICAL READINESS!

CONSULT A TRAINED SUPERVISOR TO FAMILIARIZE YOU WITH THE MACHINE'S PERFORMANCE

CHARACTERISTICS AND PROPER USE!

BE SURE THAT THE SEAT IS IN ITS FULLY ENGAGED POSITION!

FAILURE TO COMPLY COULD RESULT IN

SERIOUS INJURY OR EVEN DEATH!

Pectoralis Major

Select the desired weight. DO NOT EXCEED YOUR KNOWN PERFORMANCE
CAPABILITIES!

Adjust seat height to the desired exercise height. BE SURE THAT THE SEAT IS IN ITS FULLY ENGAGED
POSTITION.

ASSUME A FULLY SEATED POSITION with back resting firmly against vertical support pad and feet squarely
anchored to ground.

PERFORM EXERCISE IN A SLOW, CONTROLLED MANNER! Avoid jerky movements.

Breathe normally.

Upon completion of exercise, LOWER WEIGHTS GENTLY to the original starting position.

UPPER

BODY

ST
A

TIONS

Summary of Contents for AG 1000


































































































Search results

Summary of Contents for AG 1000

Reviews:

Related manuals for AG 1000

Brands by name

Popular brands

Body Masters AG 1000, Instruction Manual

Search results

Summary of Contents for AG 1000

Reviews:

Related manuals for AG 1000

Brands by name

Popular brands