background image

7

OPTI 780

3.

MAINTENANCE

3.1. 

Disposal of ashes

OPEN THE ASHPAN DOOR FOR THE DISPOSAL OF ASHES.

ASHES SHOULD BE PLACED IN A METAL CONTAINER WITH A TIGHT-FITTING 
LID.  THE CLOSED CONTAINER OF ASHS SHOULD BE PLACED ON A NONCOM
BUSTIBLE FLOOR OR ON THE GROUND, WELL AWAY FROM ALL COM-

 

 

BUSTIBLE MATERIALS, PENDING FINAL DISPOSAL.  IF THE ASHES ARE DIS-

 

 

POSED OF BY BURIAL IN SOIL OR OTHERWISE LOCALLY DISPERSED, THEY 
SHOULD BE RETAINED IN THE CLOSED CONTAINER UNTIL ALL CINDERS 
HAVE 

THOROUGHLY 

COOLED.

3.2. Chimney 

sweeping

We recommend a professional chimney cleaner inspect and clean the chimney at least 
once 

year.

- Dismantle the 2 baffl es (see «Dismantling the baffl es»).  Close the door, thermostat and

the ash box door.

- In order to put back the baffl es in the position adapted to your chimney stack after a

chimney sweeping, note here the ideal position (see page on adjustment of the baffl es):

Upper baffl e: open - ½ open - closed
Lower 

baffl e: open - closed

- Place the grate in the closed position .

- After cleaning the chimney and the dust has settled, it can be removed with a vacuum

cleaner.

3.3. General 

maintenance

Components exposed to high combustion temperatures should be inspected regularly.  Small 
deformation does not alter a normal operating.

· 

 

 

air distributor

: Clear, if necessary, the air intake holes.

· 

 

 

grates

: Check that there are no objects limiting their movements.

· 

 

 

fan

:  DISCONNECT the power supply, DISMANTLE the fan and RE-MOVE it.  CLEAN

the blades of the turbine using a brush (COM-PRESSED AIR IS NOT ALLOWED).  
Reassemble 

all.

· 

 

 

thermostat

:  Check its correct clearance.  Your dealer can check the adjustment.

· door: Check the sealing of the stainless steel seal.  If necessary, your dealer may adjust or

replace it.  Check the correct operation of the lock and of the opening safety.

USA

USERS AND MAINTENANCE MANUAL

Summary of Contents for OPTI 780





























Reviews: