4
OPTI 780
2.
OPERATION
OF
THE
APPLIANCE
2.1.
Use of the control and safety devices
1.
the door fl ap
: NEVER KEEP IT OPEN DURING THE OPERATION OF THE
APPLIANCE.
2.
the thermostat
: It adjusts the quantity of primary air for burning according to its position.
Its
fl ap opens and closes according to the temperature of the convection
chamber. Its control button is telescopic to make its operation easier.
3.
the ashpan door
: It provides access to the ash box and to the de-ashing arm. IT
MUST
ALWAYS
BE
TIGHTLY
CLOSED
WHEN
A
FIRE
IS
BURNING(otherwise the combustion air is not controlled and the fi re
races
OVERHEATING
OF
THE
APPLIANCE).
4.
de-ashing arm
: To use it, pull it towards the front. It is used to adapt the grate to the type
of fuel to be burnt (left position: open grate for starting fi re; right position:
closed grate for wood). Removing the ashes is made by moving it from the
right to the left.
5.
the ash pan
: In the shape of a shovel to allow the collection of ashes at the back of the
equipment.
Monitor
the
fi lling of the ash pan and empty it before it over
fl ows.
6.
closing the door and the «cold handle»
: Place the cold handle in the hole of the latch to
open
and
close.
7.
microswitch
: If ventilation installed, a switch automatically stops the convection fan when
the door is opened.
USERS AND MAINTENANCE MANUAL
Summary of Contents for OPTI 780
Page 26: ...25 OPTI 780 USA INSTALLATION INSTRUCTIONS...
Page 28: ......
