background image

18

2.  Použití

2.1. Popis produktu

Pro  správné  používání  produktu  je  vhodné  se 

seznámit s jeho komponenty.

1

Konstrukce dvířek je umístěna za sklem a dveřní 

vzpěra je vsazena do vnitřní části. Dvířka tak umož

-

ňují větší potěšení z ohně.

2

Klička na dveřích má dvě pozice a při roztápění 

lze ponechat pootevřená dvířka, čímž se zabrání 

kondenzaci kouře na sklo.

3

Spalovací komora je hluboká a odstupňovaná, což 

umožňuje koncentraci spalin ve středu krbové vložky. 

Díky tomu je používání krbové vložky příjemnější. 

Těsnost krbové vložky je zajištěna svařením různých 

komponentů a spojů s kovovým jádrem ve dvířkách. 

4

Primární vzduchové kanály z nerezu jsou snadno 

odnímatelné.

5

Sekundární vzduch a oplachový vzduch je ohříván 

v teplovzdušných rozvodech, které obklopují topné 

těleso. 

6

Oplachový vzduch je přiváděn pod a nad sklo. 

Deflektory ženou tento vzduch na sklo a tak udržují 

sklo čisté. 

7

Systém snadného nastavení umožňuje pomocí jednoho ovladače nastavit výkon krbové vložky. 

Značky „+“ a „-“ usnadňují používání a ovládání ohně. Tento ovladač se nezahřívá, je nenápadný, 

ale účinný.

8

Termostat ovládá primární vzduch. Umožňuje ovládat oheň a chrání krbovou vložku před možným 

přehřátím.

9

Nastavitelná přepážka Skamolex je zesílena nerezovou ocelí. Přepážka vrací maximální množství 

tepla k topeništi, odvádí plyny a zvyšuje účinnost krbové vložky a přizpůsobuje krbovou vložku 

tahu komínu.

10

Vnitřní prostor krbové vložky je vybaven Skamolexem (vermikulitem) nebo z černého betonu. Oba 

tyto materiály se vyznačují dlouhou životností a odolávají vysokým teplotám ve spalovací komoře.

11

Oba ventilátory (volitelná výbava) jsou velmi tiché. Automatický systém chodu ventilátorů zajišťuje 

jejich automatické spuštění i variace. Volič teploty umožňuje uživateli volbu ze 3 režimů provozu. 

Pokud jsou dvířka otevřená, spínač na dvířkách přeruší ventilaci.

12

Oba vývody teplého vzduchu jsou propojené s kouřovody a rozvádí teplo do prostoru.

2.  Use

2.1. Description appliance

To  get  the  best  use  from  the  appliance  we 

have included a description of its main com

-

ponents.

1

The door structure is located behind the window, 

with the door posts inclined inwards. This means 

that the door provides a clear view of the fire.

2

The two-position latch means that the door can 

be left ajar during lighting to prevent condensation 

forming on the glass.

3

The combustion chamber is deep and stepped, 

allowing the combustion bed to be concentrated in 

the centre of the wood-burner. This allows greater 

flexibility of use. The wood-burner's airtightness is 

guaranteed by the complete welding of the vari

-

ous components and the use of metal-core joints 

on the door. 

4

The stainless steel primary air passages can be 

easily removed. 

5

 Secondary and smoke extraction air is heated in 

the air passages surrounding the wood-burner 

stove. 

6

The smoke extraction air is drawn below and 

above the glass. The baffles guide this air on to 

the glass, ensuring it remains clean. 

7

The simplified control system allows you to adjust the appliance's power with a single control. The 

clearly marked "+" and "-" simplify the control and use of the wood-burner. It remains cool to the 

touch and is designed to be discreet but effective.

8

The thermostat controls the primary air. It is used to regulate the fire and protects the appliance 

from possible overheating.

9

The adjustable Skamolex baffle is equipped with stainless steel reinforcements. It allows a maxi

-

mum amount of heat to be projected back onto the combustion bed, guides the gases to increase 

the appliance's output, and adapts the wood-burner to the chimney's draught.

10

The interior of the appliance is available in Skamolex (vermiculite) or black concrete. Both materi

-

als are durable and designed to withstand the high temperatures within the combustion chamber.

11

The 2 fans (available as an option) are particularly quiet. The automatic fan control system 

automatically starts and regulates the fans. The speed selector provides a choice of 3 operating 

modes. A door switch turns off the fans when the door is open.

12 Ducting can be connected to the 2 hot air outlets for diffusing the heat produced in the house.

1

2

3

4

5

6

7

8

10

9

12

11

Summary of Contents for Concept 540









































Reviews: