53
AT Command Reference
Commands
This section describes the AT commands in detail, giving
examples where relevant. The commands are grouped
as follows:
• Mode selection
• Call control commands
• Extended call control commands
• DTE interface commands
• Miscellaneous commands
• Configuration
For notation conventions please refer to Section One.
Mode Selection
&Q Communication Mode
Syntax:
AT&Q[0|1|2|3|4]
Description:
Sets the communication mode as follows:
&Q0
AT dialing, asynchronous operation (default)
&Q1
DTR dialing, asynchronous operation
&Q2
Dial-on-data, asynchronous operation
&Q3
PPP mode (asynchronous to synchronous PPP
conversion; used for most Internet ISDN services)
&Q4
Command line configuration mode.
DTR dialing and dial-on-data are described in Section
Four
. PPP mode provides AT dialing, but when the
connection is established asynchronous to synchronous
PPP conversion is enabled. Use this option if your
internet provider requires synchronous PPP. Command
line configuration is defined in Section Four.
TU120AE.PM5
2/16/96, 11:05 AM
53
Summary of Contents for Webglider-460
