77
The SET command parameters are defined below, they are
arranged in alphabetical order, rather than type.
SET AUTODIAL
Type:
Data port parameter
Syntax:
SET AUTODIAL <stored number index> <attempts>
<redial
timer> <inactivity timer>
Description:
This command is only relevant when the dialing
mode is set to DTR dialing or dial-on-data. Dial-on-data mode
only supports an inactivity timer where an ISDN connection can
be dropped if no data is passed in either direction for a particular
period. Parameters for this command are as follows:
stored number index:
the index (1-32) into the stored number
directory of the number to be called.
attempts:
the number of connection attempts (0-32) that the
WEBGLIDER should make if the connection fails (0 means try
forever).
redial timer:
the time interval in seconds between attempts (0-
3600).
The inactivity timer is the length of time in which no traffic has
passed. The device will drop the call. This is only relevant to dial-
on-data mode and can be disabled if not required, values are in
seconds ranging from zero (disabled) to 3600 (60 minutes).
Examples: SET AUTODIAL 4 2 60 0
This example causes stored number 4 to be dialed when the
dialing criterion is met (see SET DIALING). If the connection fails,
one further attempt will be made after a wait period of 60 seconds.
See also: SET DIALING, SET STORED NUMBER
Additional Command Line Options
TU120AE.PM5
2/16/96, 11:05 AM
77
Summary of Contents for Webglider-460
