Boca Systems Webglider-460, Reference Manual

Page: 89 / 104

89
When a local disconnect occurs Cause will be one of the following:
DTR The local DTE was no longer ready.
ATH An ATH (hang-up) command was issued by the DTE.
INACT The port is in dial-on-data mode and the inactivity
timer has expired.
V120 T/O The V.120 connection was not established to the
remote device.
SAVE
Syntax:
SAVE
Description: This command causes the configuration information
to be saved, allowing the WEBGLIDER to be powered off, without
the configuration information being lost. This operation can take a
few seconds to complete.
EXIT
Syntax:
EXIT
Description: This command exits configuration and returns
back to AT dialing mode.
HELP or ?
Syntax:
HELP [topic] or ? [topic]
Description: This command provides helpful information on the
commands available and how to perform certain functions. Topic
is optional, if specified help is provided for the topic stated, if not
specified a list of help topics is provided.
CLEAR
Syntax:
CLEAR
Description:
This command causes the WEBGLIDER to
clear the screen. The screen is cleared by sending a carriage return
and multiple line feeds to the terminal device.
Additional Command Line Options
TU120AE.PM5 2/16/96, 11:05 AM 89