71
Extended Response Codes
These messages are generated as responses to extended ISDN call
commands (i.e. those starting with a ‘*’), or when an incoming call
is received when extended response codes are selected (see S112).
There are no numeric substitutes for these text messages.
Note:
The availability of user-to-user information and caller ID
may vary between networks.
Extended RING 1
Syntax:
RING:<uui>,<calling address[*subaddress]>
Meaning:
This message is sent when an incoming call is received
and S112 bit 0 is set. uui shows user-to-user information (if any).
This information was sent by the calling DTE when the connection
was initiated and is enclosed in double quotes. The address of the
remote DTE is provided in the form calling address[*subaddress].
Examples:
RING:”PPP”,4075557710*143
In this example an incoming call has been received from remote
ISDN address 4075557710, subaddress 143. The user-to-user
information PPP was sent with the call.
RING:,212
An incoming call has been received from remote ISDN address
212. No user-to-user information was supplied with the call.
AT Command Reference
TU120AE.PM5
2/16/96, 11:05 AM
71
Summary of Contents for Webglider-460
