Boca Systems Webglider-460, Reference Manual

Page: 54 / 104

54
WEBGLIDER-460
Call Control Commands
A Answer
Syntax: ATA
Description: This command causes an incoming call to be
answered. The command can be aborted by the PC (or DTE)
sending any character when the command is executing.
See also:
*A, S0, RING
D Dial
Syntax
ATD<isdn number[*subaddress]>
Description Initiates a call to the ISDN address defined by isdn
number (and optional subaddress).
To dial a pre-stored number the following syntax should be used:
ATDS=n
where n is the index of the stored number.
Aggregated calls are made using the same command, two B-
channels are used rather than one, see &B.
Examples:
ATD12025556000
An ISDN call is initiated to 12025556000.
ATD5550620*2 calls the equipment at 5550620, specifying
subaddress 2.
See also:
*D, &Z, &B
H Hook
Syntax:
ATH[0|1]
Description: This command causes a call to be cleared. This
command cannot be entered during a call while in data mode, the
user must escape back to command mode using ‘+++’.
H Same as H0
TU120AE.PM5 2/16/96, 11:05 AM 54