STP-H803/H1303 Series Instruction Manual
LCD Messages
Probable Causes
Countermeasures
Referred
Section
P.Cable Disconnected
Incorrect connection of the STP
connection cable.
Connect the cable
correctly. If the cable
connector is not locked,
lock it securely.
6.4.2
Failure of the STP connection
cable.
Contact Service office.
Malfunction
information
PCB->DSP com fail
Failure of the STP control unit. Contact Service office.
Malfunction
information
Power Supply Failure
Failure of the STP control unit. Contact Service office.
Malfunction
information
RAM Error
Failure of the STP control unit. Contact Service office.
Malfunction
information
START NOT ALLOWED When the extent of the damage
on the touch down bearing
exceeds the second damage limit
and the start is not allowed.
Overhaul is needed.
Contact Service office.
Malfunction
information
Second Damage Limit When the extent of the damage
on the touch down bearing
exceeds the second damage limit
and the start is not allowed.
Overhaul is needed.
Contact Service office.
Malfunction
information
Speed Pulse Lost
Failure of the STP pump.
Contact Service office.
Malfunction
information
Failure of the STP control unit. Contact Service office.
Malfunction
information
T.Cable Disconnect
Disconnection of the TMS
connection cable.
Connect the cable
correctly. If the cable is
not locked, lock it securely.
6.4.2
Failure of the TMS connection
cable.
Contact Service office.
Malfunction
information
Disconnection of the TMS sensor. Contact Service office.
Malfunction
information
Incorrect setting of the TMS
function.
When the TMS function is
in no use, set the TMS
function to "DISABLE".
9.3
TMS Breaker Trip
The TMS unit earth leakage
breaker (optional) is "OFF"
1) Incorrect setting of the
TMS unit earth leakage
breaker.
2) Failure of the TMS heater
or the valve
1) Always remain the
TMS unit earth
leakage breaker
"ON."
2) Contact Service
office.
Instruction
Manual of
TMS Unit
Problem
Check Sheet
T
ro
ub
le
sh
oo
tin
g
11-6
