6-23
Recall Menu (FUNC + RECALL key)
Configuration #
Name
Help Line
Recalling System Configurations
Use the following procedure to recall a stored or default system configuration:
Enter the Recall Menu (
FUNC
+
RECALL
).
Select a configuration number.
From the Recall Menu, press the recall key sequence (fu recall).
*Note: Configuration 0 is the factory default setting.
Counter Menu (FUNC + AUX1 key)
Counter Enable
Counter Enable
T Counts
T Counts
G Counts *
Help Line
Help Line
* Enabled when the Trigger Mode is set to Dual Trigger operation
(Instrument must be equipped with the Dual Trigger Option. Visit
www.berkeleynucleonics.com
for more details).
Using the Counter Function
The Counter function counts the number of T
0
pulses output by the system clock.
When the unit is operated in system single shot mode, the T
0
count reflects the
number of incoming trigger pulses.
Information Menus (FUNC + 0 key)
Information Menu A
Model Number
Serial Number
Firmware Ver.
FPGA Ver.
Information Menu B
FW ID #
GA ID #
Module IDs
Instr. Options
The Information Menus provide all of the pertinent version numbers and serial
numbers for the unit. This information should be readily available when
contacting customer service for troubleshooting help.