![background image](http://html1.mh-extra.com/html/bnc/575-series/575-series_operating-manual_2781271016.webp)
6-16
6 575 Menu Structure
System Mode Menus (FUNC + MODE key)
MODE:
Continuous
MODE: Single
Shot
MODE: Burst
MODE: Duty
Cycle
#/On
#/Burst
#/Off
Setting System Mode of Operation
The
MODE
menu sets the T
0
system timer mode. The menu will show the extra
set parameters (Burst, On & Off) only when they are appropriate.
Mode:
Selects the T
0
mode: Continuous, Single Shot, Burst or Duty
Cycle mode.
Burst:
Sets the number of pulses to be generated when in Burst
mode.
On:
Sets the number of pulses to be generated during each on
cycle.
Off:
Sets the number of pulses to skip each during off cycle when
in the Duty Cycle mode.
*NOTE: Any mode may be started by either the
RUN/STOP
key in the internal
trigger mode or armed by the
RUN/STOP
key and started by an external trigger
in the external trigger mode. In the single shot and burst modes, (internally
triggered) the unit disarms itself at the end of the pulse train. Pressing the
RUN/STOP
key after the unit has been disarmed will generate a new pulse train.
Channel Menus (A, B, C, D, E, F, G, or H key)
Timing Menu
Channel Enable
Sync Source
Pulse Width
Delay
Output Configuration Menu
Channel Enable
Channel Enable
Channel Enable
Channel Enable
Channel Enable
Output Type:
TTL/CMOS
Output Type:
Adjustable
Output Type:
Optical
Output Type:
High Z
Output Type:
Low Z
Polarity
Polarity
Polarity
Polarity
Output Level
Output Level
Output Level