BMW X6 M50i 2021 Owner'S Manual Download Page 300

Page: 300 / 400

Folding back the backrest

Return the rear seat backrest to the seat position
and engage it.

Folding down the center section

Fold down the center head restraint.

Pull lever and fold the center section forward.

With an emergency wheel:

enlarging the cargo area

Principle

The emergency wheel and any related compo‐
nents can be temporarily removed to enlarge the
cargo area.

Removing the emergency wheel

and the storage compartments

To remove the cargo area floor, pull it upward
directly behind the rear backrests.

Remove tool holder and emergency wheel,
refer to page

346

Loosen the ratchet strap from the lashing
eyes.

Remove the storage compartment.

Remove the storage well.

Insert the cargo floor panel.

Inserting the emergency wheel

and the storage compartments

Proceed in reverse order to insert the emergency
wheel and the storage compartments.

Seite 300

CONTROLS

Cargo area

300

Online Edition for Part no. 01405A38F56 - VI/21

Summary of Contents for X6 M50i 2021

















































































































































































































































































































































































































Search results

Summary of Contents for X6 M50i 2021

Reviews:

Related manuals for X6 M50i 2021

Brands by name

Popular brands

BMW X6 M50i 2021, Owner'S Manual

Search results

Summary of Contents for X6 M50i 2021

Reviews:

Related manuals for X6 M50i 2021

Brands by name

Popular brands