BMW X6 M50i 2021 Owner'S Manual Download Page 113 | Manualshive

Page: 113 / 400

background image

Safety information

Warning

Use of a safety belt to buckle more than one
person will potentially defeat the ability of the
safety belt to serve its protective function.
There is a risk of injury or danger to life. Do not
allow more than one person to wear a single
safety belt. Infants and children are not allowed
on an occupant's lap, but must be transported
and secured in designated child restraint sys‐
tems.

Warning

The protective effect of safety gear, including
safety belts, can be limited or lost when safety
belts are fastened incorrectly. An incorrectly
fastened safety belt can cause additional inju‐
ries, for instance in the event of an accident,
braking or evasive maneuvers. There is a risk of
injury or danger to life. Make sure that all occu‐
pants are wearing safety belts correctly.

Warning

With a rear backrest that is not locked, the pro‐
tective effect of the middle safety belt is not
guaranteed. There is a risk of injury or danger
to life. If you are using the middle safety belt,
lock the wider rear seat backrest.

Warning

The protective effect of safety gear, including
safety belts, may not be fully functional or fail in
the following situations:

▷ The safety belts or safety belt buckles are

damaged, soiled, or changed in any other
way.

▷ Seat belt tensioners or belt retractors

were modified.

Safety belts can be imperceptibly damaged in
the event of an accident. There is a risk of injury
or danger to life. Do not modify safety belts,
safety belt buckles, seat belt tensioners, belt
retractors or belt anchors and keep them clean.
Have the safety belts checked after an accident
at the dealer’s service center or another quali‐
fied service center or repair shop.

Correct use of safety belts

▷

Wear the safety belt twist-free and tight to
your body over your lap and shoulders.

▷

Wear the safety belt deep on your hips over
your lap. The safety belt may not press on
your stomach.

▷

Do not rub the safety belt against sharp
edges, or guide it or jam it in across hard or
fragile objects.

▷

Avoid thick clothing.

▷

Re-tighten the safety belt frequently upward
around your upper body.

Buckling the safety belt

1.

Guide the safety belt slowly over shoulder
and hip to put it on.

2.

Insert the tongue plate into the safety belt
buckle. The safety belt buckle must engage
audibly.

When the safety belt is fastened, the driver's and
front passenger's belt straps are automatically
tightened once after driving away.

Seite 113

Seats, mirrors and steering wheel

CONTROLS

113

Online Edition for Part no. 01405A38F56 - VI/21

«
...
111
112
113
114
115
...
»

Summary of Contents for X6 M50i 2021

















































































































































































































































































































































































































Reviews:

No comments

Related manuals for X6 M50i 2021

Brand: Victory 4x4 Pages: 13

Brand: BGS technic Pages: 5

Brand: Oldsmobile Pages: 344

Brand: ABL Pages: 66

Brand: Camcar Pages: 6

Brand: ABL Pages: 4

Brand: EUFAB Pages: 52

Brand: Dodge Pages: 24

Brand: Fab Fours Pages: 19

Brand: Fiat Pages: 24

Brand: Valeo Pages: 28

Truck Training Model

Brand: WABCO Pages: 56

Brand: VER-MAC Pages: 64

Brand: AEM Pages: 27

Brand: Brodit Pages: 2

Brand: Warn Pages: 5

Brand: MVG Pages: 18

Brand: Draw tite Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands