BMW X6 M50i 2021, Owner'S Manual

Page: 173 / 400

Welcome lights
Principle
The exterior lighting is switched on automatically
when approaching or unlocking the vehicle.
General information
Depending on the equipment, the exterior light‐
ing of the vehicle can be set individually.
Activating/deactivating welcome
light
1. "CAR"
2. "Settings"
3. "Exterior lighting"
4. Depending on the equipment, select the fol‐
lowing setting:
▷ "Welcome and goodbye"
When unlocking the vehicle, individual
light functions are switched on for a lim‐
ited time.
▷ "Door handle lights"
Door handles and the ground in front of
the doors are illuminated for a limited
time.
▷ "Welcome Light Carpet"
The area next to the vehicle is illuminated
for a limited time.
LED light carpet
The light source is located in the position indi‐
cated.
Keep the light source clean and unobstructed.
Pathway lighting
Principle
For the illumination of the vehicle’s surroundings
after exiting the vehicle, the exterior lighting can
be switched on for a defined period of time.
Switching pathway lighting on
After switching off the drive-ready state, briefly
push the turn signal lever forward.
Setting the duration
1. "CAR"
2. "Settings"
3. "Exterior lighting"
4. "Pathway lighting"
5. Select the desired setting.
6. "OK"
Daytime driving lights
General information
The daytime driving lights light up when drive-
ready state is switched on.
Activate/deactivate daytime
driving lights
In some countries, daytime driving lights are
mandatory, so it may not be possible to deacti‐
vate the daytime driving lights in front.
1. "CAR"
2. "Settings"
3. "Exterior lighting"
4. Depending on country specifications:
"Daytime driving lights" or "Daytime driving
lights, rear"
Seite 173
Lights
CONTROLS
173
Online Edition for Part no. 01405A38F56 - VI/21