BMW X6 M50i 2021, Owner'S Manual

Page: 71 / 400

In this case, a PIN can be set up to activate the
driver profile.
Countries in which ConnectedDrive is not availa‐
ble: If a PIN was not set up or the PIN is not
known, the driver profile cannot be activated.
Countries in which ConnectedDrive is available: If
a PIN was not set up or the PIN is not known, the
driver's profile can be activated with the access
data of the corresponding ConnectedDrive ac‐
count.
1. "CAR"
2. "Driver profiles"
3. Tilt the Controller to the right.
As an alternative for Steps 1 to 3, the profile
image can be tapped in the top status bar.
4. "Driver recognition"
5. "using PIN"
Changing/canceling the
recognition function
When another vehicle key or another digital key
is assigned to a driver profile, the current assign‐
ment must be canceled first.
1. "CAR"
2. "Driver profiles"
3. Tilt the Controller to the right.
As an alternative for Steps 1 to 3, the profile
image can be tapped in the top status bar.
4. "Driver recognition"
5. Select the desired setting:
▷ "with vehicle key"
▷ "With Digital Key"
6. "Activate linkage"
When the vehicle and vehicle key will be handed
over, such as for maintenance, carry out the fol‐
lowing steps first:
▷ Setting up PIN.
▷ Canceling recognition using the vehicle key.
▷ Switching to the guest profile.
The handed over vehicle key can then no longer
be used to access the personal driver profile.
Selecting a driver profile
Depending on the recognition setting, the driver
profile will be selected automatically.
If the guest profile is active, the driver profile will
be selected on the Welcome screen or via iDrive.
A PIN may have to be entered.
1. "CAR"
2. "Driver profiles"
As an alternative for Steps 1 and 2, the profile
image can be tapped in the top status bar.
3. Select driver profile.
4. "OK"
All settings stored in the selected driver profile
are automatically applied.
Switching synchronization with
the ConnectedDrive account
on/off
The settings stored in the driver's profile are
synchronized with the personal ConnectedDrive
account. This means that it is possible to use the
personal settings in other BMW vehicles with
ConnectedDrive access as well, if this function is
supported.
The synchronization with the ConnectedDrive
account is enabled when a driver profile is cre‐
ated or via iDrive:
1. "CAR"
2. "Driver profiles"
3. Tilt the Controller to the right.
As an alternative for Steps 1 to 3, the profile
image can be tapped in the top status bar.
4. "Settings"
5. "Synchronize driver profile"
6. "Synchronize driver profile"
Seite 71
Personal settings
CONTROLS
71
Online Edition for Part no. 01405A38F56 - VI/21