manualshive.com logo in svg

BMW X6 M50i 2021, Owner'S Manual

The BMW X6 M50i 2021 Owner's Manual is a comprehensive guide that ensures you get the most out of your luxury SUV experience. This invaluable manual is available for free download at manualshive.com, providing you with detailed instructions and insights to unlock the full potential of your vehicle.

Share
Download
background image

3.

"Tire Pressure Monitor"

4.

Make sure that correct tire settings have
been made.
Tire settings, refer to page 

332

.

5.

Turn on drive-ready state and do not drive
off.

6.

Reset tire pressure: "Perform reset".

7.

Drive away.

The wheels are displayed in gray and the follow‐
ing is displayed "Resetting tire pressure…".
After a travel time of several minutes, the set tire
inflation pressures are accepted as the prede‐
fined tire inflation pressures. The reset is com‐
pleted automatically while driving.
After a successfully completed reset, the wheels
on the Control Display are shown in green and
the following is displayed: "Reset successful."
You may interrupt this trip at any time. When you
continue the reset resumes automatically.

Messages: for tires without

special approval

General information

A low tire inflation pressure may cause the DSC
Dynamic Stability Control to be switched on.

Safety information

Warning

A damaged regular tire with low or missing tire
inflation pressure impacts handling, such as
steering and braking response. Run-flat tires
can maintain limited stability. There is a risk of
accident. Do not continue driving if the vehicle
is equipped with normal tires. Follow the infor‐
mation on run-flat tires and continued driving
with these tires.

If a tire inflation pressure check is
required

Message

An icon with a Check Control message appears
on the Control Display.

Icon

Possible cause

Inflation was not carried out according
to specifications, for instance when the
tire has not been sufficiently inflated or
in the case of a natural steady tire pres‐
sure loss.

Measure

Check the tire pressure and correct as needed.

If the tire inflation pressure is too
low

Message

A yellow warning light is illuminated in
the instrument cluster.

In addition, an icon with a Check Control mes‐
sage appears on the Control Display.

Icon

Possible cause

There is a tire pressure loss.

Measure

1.

Reduce the vehicle speed. Do not exceed a
speed of 80 mph/130 km/h.

2.

At the next opportunity, for instance at a filling
station, check the tire inflation pressure in all
four tires and correct if necessary.

Seite 334

MOBILITY

Wheels and tires

334

Online Edition for Part no. 01405A38F56 - VI/21

Summary of Contents for X6 M50i 2021

















































































































































































































































































































































































































Reviews:

No comments

Related manuals for X6 M50i 2021

OCTO SmartDiag2GO GD201-O User Manual preview
SmartDiag2GO GD201-O
Brand: OCTO Pages: 5
Genesis Multiple G9F18 AU000 Quick Start Manual preview
Multiple G9F18 AU000
Brand: Genesis Pages: 3
FORM FIT SD 13R07-5 Installation Instructions preview
SD 13R07-5
Brand: FORM FIT Pages: 2
Thule Edge Flush Rail Instructions Manual preview
Edge Flush Rail
Brand: Thule Pages: 12
RAM Ram Dodge 2010 Owner'S Manual preview
Ram Dodge 2010
Brand: RAM Pages: 616
Nav TV AUDI-P60H Install Manual preview
AUDI-P60H
Brand: Nav TV Pages: 9
Honda Clarity 2018 Owner'S Manual preview
Clarity 2018
Brand: Honda Pages: 81
TATA Motors TIGOR EV 2021 Owner'S Manual preview
TIGOR EV 2021
Brand: TATA Motors Pages: 236
Meta System 900000358 Installation Technical Sheet preview
900000358
Brand: Meta System Pages: 22
Safe Fleet RVS systems RVS-M641 Instruction Manual preview
RVS systems RVS-M641
Brand: Safe Fleet Pages: 24
Quadratec 11113.1435 Quick Start Manual preview
11113.1435
Brand: Quadratec Pages: 14
Hummer HX-T Owner'S Manual preview
HX-T
Brand: Hummer Pages: 31
Prorack K663 Fitting Instructions Manual preview
K663
Brand: Prorack Pages: 15
GMC TERRAIN 2018 Owner'S Manual preview
TERRAIN 2018
Brand: GMC Pages: 312
Chrysler 200 Convertible Specifications preview
200 Convertible
Brand: Chrysler Pages: 5
Honda 2013 Crosstour EX Technology Reference Manual preview
2013 Crosstour EX
Brand: Honda Pages: 20
Mr Handsfree BLUE VOICE Quick Reference Manual preview
BLUE VOICE
Brand: Mr Handsfree Pages: 2
caron PHC-9000 User Manual preview
PHC-9000
Brand: caron Pages: 10

Brands by name

Popular brands

Load more brands