manualshive.com logo in svg

BMW X6 M50i 2021, Owner'S Manual

The BMW X6 M50i 2021 Owner's Manual is a comprehensive guide that ensures you get the most out of your luxury SUV experience. This invaluable manual is available for free download at manualshive.com, providing you with detailed instructions and insights to unlock the full potential of your vehicle.

Share
Download
background image

Air conditioning is switched on automatically with
the AUTO program.
When using the cooling mode, condensation that
will exit below the vehicle.

Maximum cooling

Principle

The system is set to the lowest temperature, op‐
timum air flow and recirculated-air mode with the
drive-ready state switched on.

Functional requirement

The function is available at an outside tempera‐
ture above approx. 32 ℉/0 ℃ and with the drive-
ready state switched on.

Switching maximum cooling on/off

Press the button.
The LED is illuminated when maximum

cooling is switched on.

Air flows out of the air vents to the upper body
region. The air vents need to be open for this.
The air flow can be adjusted with the program
active.

AUTO program

Principle

The AUTO program cools, ventilates or heats
the car's interior automatically.
The air distribution and the temperature are con‐
trolled automatically depending on the interior
temperature and the desired temperature setting
including the selected intensity of the air flow.

Switching the AUTO program on/off

Using the button:

Press the button.
The LED of the button is illuminated

with the AUTO program switched on.

Via iDrive:

1.

"CAR"

2.

"Settings"

3.

"Climate control"

4.

"Heating/ventilation"

5.

"Driver"

6.

"Automatic"

Depending on the selected settings and outside
influences, the air is directed to the windshield,
side windows, upper body, and into the floor
area.
Point the side air vents toward the side windows.
The cooling function is switched on with the
AUTO program.
At the same time, a condensation sensor con‐
trols the program so as to prevent window con‐
densation as much as possible.
The AUTO program is switched off automati‐
cally, when manual air distribution is set.

Controlling the intensity of the air
flow

With the AUTO program switched on, the inten‐
sity can be adjusted. This changes the automatic
control for the air mass.
Using the button:

Press the lower or upper side of the
button: decrease or increase intensity.

Via iDrive:

1.

"CAR"

2.

"Settings"

3.

"Climate control"

4.

"Heating/ventilation"

5.

"Driver"

6.

"Level"

7.

Set the desired intensity.

The selected intensity is shown on the climate
control display.

Seite 272

CONTROLS

Climate control

272

Online Edition for Part no. 01405A38F56 - VI/21

Summary of Contents for X6 M50i 2021

















































































































































































































































































































































































































Reviews:

No comments

Related manuals for X6 M50i 2021

Calira 811 Manual preview
811
Brand: Calira Pages: 14
Valeo SC400 Operating Instructions Manual preview
SC400
Brand: Valeo Pages: 17
AC Schnitzer F40 Fitting Instructions Manual preview
F40
Brand: AC Schnitzer Pages: 16
Jeep Liberty Quick Reference Manual preview
Liberty
Brand: Jeep Pages: 6
Vauxhall Ampera Owner'S Manual preview
Ampera
Brand: Vauxhall Pages: 199
AccuAir AA-4397 Installation Manual preview
AA-4397
Brand: AccuAir Pages: 40
Peak PKC0RG Owner'S Manual preview
PKC0RG
Brand: Peak Pages: 10
Cadillac 2012 Escalade Hybrid Manual preview
2012 Escalade Hybrid
Brand: Cadillac Pages: 90
Haibang HA998 Series Installation Instructions Manual preview
HA998 Series
Brand: Haibang Pages: 6
Yakima StickUp Installation Instructions Manual preview
StickUp
Brand: Yakima Pages: 21
Kuda 182220 Installation Instruction preview
182220
Brand: Kuda Pages: 3
CALIMA 46008 Operating Instructions Manual preview
46008
Brand: CALIMA Pages: 9
Tabernus Peram Hatch-bag Luggage System Installation Instructions Manual preview
Hatch-bag Luggage System
Brand: Tabernus Peram Pages: 10
SAFARI SS18HF Manual preview
SS18HF
Brand: SAFARI Pages: 5
Mopar 82214480 Manual preview
82214480
Brand: Mopar Pages: 17
TOGU Airgo Active cushion / Comfort Manual And Maintenance Instructions preview
Airgo Active cushion / Comfort
Brand: TOGU Pages: 2
Ranger design 1525-PCX Installation Manual preview
1525-PCX
Brand: Ranger design Pages: 22
Sintrones SBOX-2320 User Manual preview
SBOX-2320
Brand: Sintrones Pages: 55

Brands by name

Popular brands

Load more brands