BMW S 1000XR, Rider'S Manual

Page: 130 / 237

General instructions
The Maintenance chapter de-
scribes straightforward proced-
ures for checking and replacing
certain wear parts.
Special tightening torques are lis-
ted as applicable. The tightening
torques for the threaded fasten-
ers on your vehicle are listed in
the section entitled "Technical
data".
You will find information on more
extensive maintenance and repair
work in the repair instructions
on DVD for your vehicle, which
is available from your authorised
BMW Motorrad dealer.
Some of the work calls for spe-
cial tools and a thorough know-
ledge of the technology involved.
If you are in doubt, consult a
specialist workshop, preferably
your authorised BMW Motorrad
dealer.
Toolkit
1 Hook wrench
without Dynamic ESA
OE
Adjusting spring preload
for rear wheel (
66).
2 Reversible screwdriver
blade
Phillips PH1 and Torx T25
Remove the side panel
(
153).
Replacing bulbs for front
and rear turn indicators
(
151).
3 Open-ended spanner
Width across flats 14
3 Adjusting mirror arm
(
64).
Adjusting headlight beam
throw (
65).
4 Open-ended spanner
Width across flats 8/10
5 Reversible-blade screw-
driver with star-head and
plain tips
without Dynamic ESA OE
Adjusting compression-
stage damping for front
wheel (
68).
without Dynamic ESA
OE
Adjust the rebound-
stage damping for front
wheel (
69).
without Dynamic ESA
OE
Adjusting rebound-stage
damping for rear wheel
(
69).
6 Spare fuses with gripping
clamp
Mini-fuses 4 A, 7.5 A and
10 A
9
128
z Maintenance