BMW S 1000XR, Rider'S Manual

Page: 67 / 237

NOTICE
If there are doubts about the cor-
rect headlight beam throw, have
the setting checked by a special-
ist workshop, preferably an au-
thorised BMW Motorrad dealer.
Adjusting headlight beam
throw
Disengage the inner trim panel
(
154).
If, for a high load, the adjust-
ment of the spring pre-load is
no longer sufficient not to dazzle
oncoming traffic:
Turn adjusting screw 1
counter-clockwise with open-
ended spanner
2 (on-board
toolkit) to lower the headlight
beam.
Installing inboard cover
(
155).
When the motorcycle is again
ridden with a lower load:
Return the headlight to its ba-
sic setting.
Windscreen
Adjusting windscreen
Requirement
The motorcycle is at a standstill.
WARNING
Adjusting the windscreen
while riding.
Risk of falling
Do not attempt to adjust the
windscreen unless the motor-
cycle is at a standstill.
5
65
z Adjustment