BMW S 1000XR, Rider'S Manual

Page: 60 / 237

The following ride modes can be
selected:
RAIN
: For riding on a rain-wet
road surface.
ROAD
: For riding on a dry road
surface.
with riding modes Pro OE
The following riding modes are
additionally available for selec-
tion:
DYNAMIC
: For dynamic riding
on a dry road surface.
DYNAMIC PRO
: For sporty
riding (only with coding plug
installed).
With the motorcycle at a stand-
still, the selected mode is ac-
tivated after approximately two
seconds.
The newly selected riding
mode is activated as you
ride only when the following
preconditions are satisfied:
Throttle twistgrip is in idle posi-
tion.
Brake levers are in the released
positions.
The mode selected in this way
is retained with the engine-
characteristic, ABS, ASC/DTC
and Dynamic ESA adaptation
settings even after the ignition
has been switched off.
Installing encoding plug
with riding modes Pro OE
Switching off ignition ( 39).
Removing seat ( 62).
Disconnect plug 1 from the
rear carrier.
ATTENTION
Dirt and damp penetrating
inside open connectors
Malfunctions
Reinstall the protective cap
after removing the coding
plug.
Press in latch
2 and remove
cap 3 .
Insert coding plug 4 .
Position plug 1 in the rear car-
rier.
Switch on the ignition.
For safety reasons, the
RAIN
riding mode is activated by de-
4
58
z Operation