BMW S 1000XR, Rider'S Manual

Page: 70 / 237

To increase negative spring
displacement (reduce spring
preload, in other words), use
the tool from the on-board
toolkit to turn adjusting ring
2
in direction A .
Tighten screw 1 to the spe-
cified tightening torque.
Screw in adjusting ring
3 Nm
Damping
without Dynamic ESA
OE
Adjustment
Damping must be adapted to suit
the condition of the surface on
which the motorcycle is ridden
and to suit spring preload.
An uneven surface requires
softer damping than a smooth
surface.
An increase in spring preload
requires firmer damping, a re-
duction in spring preload re-
quires softer damping.
Adjusting compression-
stage damping for front
wheel
Adjust compression-stage
damping by turning adjusting
screw
1 and reading the red
scale on the left fork leg.
To increase damping: Use the
tool from the on-board kit to
turn the adjusting screw in the
appropriate direction so that
mark
2 points to a higher read-
ing on the scale.
To reduce damping: Use the
tool from the on-board kit to
turn the adjusting screw in the
appropriate direction so that
mark
2 points to a lower read-
ing on the scale.
5
68
z Adjustment