BMW S 1000XR, Rider'S Manual

Page: 157 / 237

Installing inboard cover
Install inner trim panel 2 . In this
process, note cable 4 .
Align the inner trim panel and
seat it in fairing top section
3 .
Install screws 1 .
Jump-starting
CAUTION
Touching live parts of the ig-
nition system when the en-
gine is running
Electric shock
Do not touch parts of the igni-
tion system when the engine is
running.
ATTENTION
Excessive current flowing
when the motorcycle is
jump-started
Wiring smoulders/ignites or dam-
age to the on-board electronics
If the motorcycle has to be
jump-started connect the leads
to the battery terminals; never
attempt to jump-start the en-
gine by connecting leads to the
on-board socket.
ATTENTION
Contact between crocodile
clips of jump leads and
vehicle
Risk of short-circuit
Use jump leads fitted with fully
insulated crocodile clips at both
ends.
ATTENTION
Jump-starting with a voltage
greater than 12 V
Damage to the on-board elec-
tronics
Make sure that the battery of
the donor vehicle does not ex-
ceed a voltage of 12 V.
When jump-starting the engine,
do not disconnect the battery
from the on-board electrical
system.
Removing seat (
62).
9
155
z Maintenance