BMW M 1000 RR 2021, Rider'S Manual

Page: 63 / 288

57
information on Hill Start Con-
trol Pro:
Hill Start Control function
( 159)
Setting up Hill Start Control
Pro
Switch on the ignition ( 46).
Navigate to
Settings
,
Vehicle settings
.
Select
HSC Pro
.
To switch off Hill Start Con-
trol Pro, select
Off
.
Hill Start Control Pro is deac-
tivated.
To switch on manual Hill Start
Control Pro, select
Manual
.
Hill Start Control Pro can be
activated by forcefully oper-
ating the handbrake or foot-
brake lever.
To switch on automatic Hill
Start Control Pro, select
Auto
.
Hill Start Control Pro can be
activated by forcefully oper-
ating the handbrake or foot-
brake lever.
If the brake is actuated for
approximately one second
after the vehicle has come to
a standstill and the motor-
cycle is on a gradient of at
least 3%, Hill Start Control
Pro is automatically activated.
The selected setting remains
stored even after the ignition
is switched off.
SHIFT LIGHT
Switching gearshift light on
and off
Navigate to
Settings
,
Vehicle settings
.
Switch
Shift light
on or
off.
Setting upshift indicator
Switch on the
Shift light
function.
Go to the
Settings
,
Vehicle settings
,
Configuration
menu
(under
Shift light
).
The following settings are
available:
Start RPM
End RPM
Brightness
Frequency
. A flashing fre-
quency of 0 Hz corresponds
to steady light.
Changes to brightness and
the flashing frequency are
demonstrated by the shift
light with it briefly lighting up
or flashing.