BMW M 1000 RR 2021, Rider'S Manual

Page: 48 / 288

42 STATUS INDICATORS
Gear not trained
The gear indicator flashes.
The Pro shift assistant is
not available.
Possible cause:
The gearbox sensor is not fully
trained.
Engage neutral gear
N
and,
with the vehicle at a standstill,
let the engine run for at least
10 seconds to train the idle
gear.
Engage all gears with clutch
actuation and ride at least 10
seconds with the engaged
gear.
The gear indicator starts
to flash when the gearbox
sensor has been trained
successfully.
The Gear Shift Assistant Pro
operates as described
( 158) once the trans-
mission sensor has been
completely taught-in.
If the training process was
not successful, have the fault
rectified by a specialist work-
shop, preferably an authorised
BMW Motorrad Retailer.
Hazard warning lights system
is switched on
flashes green.
flashes green.
Possible cause:
The driver has switched on the
hazard warning lights system.
Operating hazard warning
flashers ( 49).
Launch Control not ready
Shift light lights up or flashes.
L-Con not available.
Clutch too hot.
is dis-
played.
Possible cause:
The number of racing starts
possible with Launch Control
has been exceeded.
Allow the clutch to cool.
Operate the Launch Control
( 131).
Service-due indicator
If service is overdue, the
due date or the odometer
reading at which service was
due is accompanied by the
general warning light show-
ing yellow.
If the service is overdue, a yel-
low CC message is displayed.
Exclamation marks also draw
your attention to the displays
for service, service appointment
and countdown distance in the
MY VEHICLE
and
SERVICE
REQUIREMENTS
menu screens.