BMW M 1000 RR 2021, Rider'S Manual

Page: 197 / 288

191
Carefully clip in rear trim
panel in the direction of
arrow .
Install bolts 1 and 2 .
with two-up riding package OE
Install the passenger seat
( 62).
Install the tail-hump cover
( 61).
JUMP-STARTING
CAUTION
Touching live parts of the
ignition system when the
engine is running
Electric shock
Do not touch parts of the
ignition system when the
engine is running.
ATTENTION
Contact between crocodile
clips of jump leads and
vehicle
Risk of short-circuit
Use jump leads fitted with
fully insulated crocodile clips
at both ends.
ATTENTION
Jump-starting with a voltage
greater than 12 V
Damage to the on-board
electronics
Make sure that the battery
of the donor vehicle does
not exceed a voltage of
12 V.
When jump-starting the en-
gine, do not disconnect the
battery from the on-board
electrical system.
Remove the rider's seat
( 62).
Run the engine of the donor
vehicle during jump-starting.
Begin by connecting one end
of the red jump lead to the
positive terminal of the dis-
charged battery and the other
end to the positive terminal of
the donor battery.
Then connect one end of the
black jump lead to the neg-