BMW M 1000 RR 2021 Rider'S Manual Download Page 190

Page: 190 / 288

184

MAINTENANCE

Apply chain lubricant also to

the sealing rings between

chain rollers and chain links.

ATTENTION

Inadequate cleaning and lub-

rication of the drive chain

Accelerated wear

Clean and lubricate the drive

chain at regular intervals.

Lubricate the chain more fre-

quently if the motorcycle is

ridden in wet, dusty or dirty

conditions.

Lubricate the drive chain

at regular intervals.

min 800 km

To prolong chain life,

BMW Motorrad recommends

the use of BMW Motorrad

chain lubricant or:

Lubricant

Chain spray, O-ring compat-

ible

Wipe off excess lubricant.

Lubricating and caring for

low-maintenance chain

with Competition package

ATTENTION

Inadequate cleaning and lub-

rication of the drive chain

Accelerated wear

Clean and lubricate the drive

chain at regular intervals.

The low-maintenance

drive chain is cleaned and

lubricated as part of the annual

service. For optimum durability,

the low-maintenance chain can

also be lubricated at intervals

by application of a chain lub-

ricant suitable for low-mainten-

ance chains. If riding involves

above-average wear and tear

due to exposure to salt or dust

and dirt, carry out lubrication at

correspondingly more frequent

intervals.

Switch the ignition off and

select neutral.

Clean the drive chain with

a suitable cleaning product,

dry it and apply chain lub-

ricant. To prolong chain life,

BMW Motorrad recommends

the use of BMW Motorrad

chain lubricant or:

Lubricant

Chain spray, O-ring compat-

ible

Summary of Contents for M 1000 RR 2021

































































































































































































































































































Search results

Summary of Contents for M 1000 RR 2021

Reviews:

Brands by name

Popular brands

BMW M 1000 RR 2021, Rider'S Manual

Search results

Summary of Contents for M 1000 RR 2021

Reviews:

Brands by name

Popular brands