BMW Motorrad F 900 XR Rider'S Manual Download

Page: 60 / 261

Locking the steering lock

Requirement

Handlebars are turned to the left.
Radio-operated key is within re-
ception range.

Press and hold button

Steering lock audibly locks.
Ignition, lights and all electrical
circuits switched off.
To unlock the steering lock,
briefly press button

Switching on ignition

Requirement

Radio-operated key is within re-
ception range.

There are

two

ways to activate

the ignition.

Version 1:

Press button

briefly.

Parking lights and all function
circuits are switched on.
Pre-Ride-Check is carried out.
(

114)

ABS self-diagnosis is
performed. (

114)

ASC self-diagnosis is per-
formed. (

115)

Version 2:

Steering lock is engaged, press
and hold button

Steering lock is unlocked.
Parking lights and all function
circuits switched on.
Pre-Ride-Check is carried out.
(

114)

ABS self-diagnosis is
performed. (

114)

ASC self-diagnosis is per-
formed. (

115)

Switching off ignition

Requirement

Radio-operated key is within re-
ception range.

Operation

Summary of Contents for F 900 XR






































































































































































































































































Search results

Summary of Contents for F 900 XR

Reviews:

Related manuals for F 900 XR

Brands by name

Popular brands

BMW Motorrad F 900 XR, Rider'S Manual

Search results

Summary of Contents for F 900 XR

Reviews:

Related manuals for F 900 XR

Brands by name

Popular brands