BMW Motorrad F 900 XR, Rider'S Manual

Page: 95 / 261

The Bluetooth function of the
device must be enabled
The device must be "visible" to
others
The device must support the
A2DP profile
Other Bluetooth-capable de-
vices must be switched off (e.g.
mobile phones and navigation
systems).
Please consult the operating in-
structions for your communica-
tion system.
Pairing
Call up menu
Settings
,
Con-
nections
.
Bluetooth connections can be
established, managed, and
deleted in the
CONNECTIONS
menu. The following Bluetooth
connections are displayed:
Mobile device
Rider's helmet
Passenger helm.
The connection status for mobile
end devices is displayed.
Connecting a mobile end
device
Pairing ( 93).
Activate the Bluetooth function
of the mobile end device (see
operating instructions for the
mobile end device).
Select
Mobile device
and
confirm.
Select
Pair new mobile de-
vice
and confirm.
Mobile end devices are searched
for.
During the pairing, the
Bluetooth symbol flashes in
the lower status line.
Visible mobile end devices are
displayed.
Select the mobile end device
and confirm.
Observe the instructions for the
mobile end device.
Confirm that the codes match.
The connection is established
and the connection status is
updated.
If the connection cannot be es-
tablished, the troubleshooting
chart in the chapter "Technical
data" may provide assistance.
(
201)
Depending on the mobile end
device, telephone data is trans-
ferred to the vehicle automati-
cally.
Telephone data (
102)
If the phone book is not dis-
played, the troubleshooting
chart in the chapter "Technical
data" may provide assistance.
(
202)
If the Bluetooth connection
does not work as expected,
the troubleshooting chart in the
chapter "Technical data" may
provide assistance. (
201)
5
93
z TFT display